Making your inactive elements active in different alternative scenarios

Archive for category Making your inactive elements active in different alternative scenarios

Subject: Making your inactive elements active in different alternative scenarios.

Step 1: Open up the Facility Manager and turn off Apply to Active Facility Only, click on Map Selection and then finally the +Add button

Step 2: Select those elements you want to add to the Facililty (they are yellow in this case)

Step 3: Save and then Close the Facility Manager Dialog

Step 4: The Objects should be active now.

Step 5: Run the Model and check if they are being used in the RPT file.

Step 6: You can also run the Compare Scenario Command to see the different alternative models use a different set of outfalls.

SWMM 5 or SWMM 5.0 Blog