Subject:  Making your inactive elements active in different alternative scenarios in InfoSWMM

Step 1:  Open up the Facility Manager and turn off Apply to Active Facility Only, click on Map Selection and then finally the +Add button

Step 2:  Select those elements you want to add to the Facililty (they are yellow in this case)

Step 3:  Save and then Close the Facility Manager Dialog

Step 4:  The Objects should be active now.

Step 5:  Run the Model and check if they are being used in the RPT file.

Step 6:  You can also run the Compare Scenario Command to see the different alternative models use a different set of outfalls.