How to make a shape file from a Output Relate in InfoSWMM

4 Aug

How to make a shape file from a Output Relate in InfoSWMM

By Storm/Sewer Modeler with a 45 yr association with EPASWMM. Now at Autodesk supporting InfoWorks ICM_SWMM Founder http://robertdickinson.org, Chair/TAC at http://CIMM.ORG #INFOSWMM , InfoSWMM , SWMM5 How to make a shape file from a Output Relate in InfoSWMM No Comments

Note: How to make a shape file from a Output Relate in InfoSWMM

Step 1. Make an Output Relate for the Conduit Summary Table using the Operation Tab in Attribute Browser.

Step 2: Using the GIS Gateway you can save q/Q and d/D to a shape file that can then be added to the Arc GIS Table of Contents

Step 3. You now have a Shape File for the value of q/Q or Flow over Full Flow. You can also use the Symbology Tab in Data Properties to color and/or make bar charts and bubble charts from the summary q/Q and d/D values during the simulation for each link.

via Blogger http://www.swmm5.net/2013/08/how-to-make-shape-file-from-output.html

ICM SWMM & ICM InfoWorks, SWMM5