Modeling H2S in InfoSWMM, ICM and InfoSewer

6 Aug

Modeling H2S in InfoSWMM, ICM and InfoSewer

By Storm/Sewer Modeler with a 45 yr association with EPASWMM. Now at Autodesk supporting InfoWorks ICM_SWMM Founder http://robertdickinson.org, Chair/TAC at http://CIMM.ORG #INFOSEWER , #INFOSWMM , ICM , InfoSewer , InfoSWMM , SWMM5 ICM and InfoSewer, Modeling H2S in InfoSWMM No Comments

Subject: Modeling H2S in InfoSWMM, ICM and InfoSewer

You can model Sulfide in InfoSWMM/ICM and InfoSewer using the H2S water quality modeling option which uses BOD5 loading at nodes to estimate the S concentration in the nodes and links of the network using constant network parameters for:

1.       The Reaction Rate Coefficient,
2.       The Sulfide Loss Coefficient,
3.       Sulfide Flux Coefficient,
4.       Temperature in Degrees C,
5.       Soluble Sulfide Percentage,
6.       pH for the whole network, and
7.       The Ionization Constant.

Relationship between BOD5 and EBOD

Figue 1. The concentation of H2S and BOD5 can be graphed at each node and link.

Figure 2. Dialogs for H2S and BOD5 in InfoSWMM

via Blogger http://www.swmm5.net/2013/08/modeling-h2s-in-infoswmm-icm-and.html

ICM SWMM & ICM InfoWorks, SWMM5