How to Use the Compare Report Command in H2OMap SWMM and InfoSWMM

12 Oct

How to Use the Compare Report Command in H2OMap SWMM and InfoSWMM

By Storm/Sewer Modeler with a 45 yr association with EPASWMM. Now at Autodesk supporting InfoWorks ICM_SWMM Founder http://robertdickinson.org, Chair/TAC at http://CIMM.ORG #INFOSWMM , InfoSWMM , SWMM5 How to Use the Compare Report Command in H2OMap SWMM and InfoSWMM No Comments

How to Use the Compare Report Command in H2OMap SWMM and InfoSWMM

1.       Run all of your scenario using Batch Simulation and Select Conduit Summary from the Report Manager
2.      Select all of your scenarios using the Compare Report Icon
3.      You will have a lot of columns so Using the Format Report Icon select a few report variables to view
4.      You will now have a table with the Peak flow or Peak Depth for all Scenarios
5.      h/t MJ for the suggestion

How to Use the Compare Report Command in H2OMap SWMM and InfoSWMM

via Blogger http://www.swmm5.net/2013/10/how-to-use-compare-report-command-in.html

ICM SWMM & ICM InfoWorks, SWMM5