EPASWMM5, Autodesk InfoWorks ICM_SWMM & ICM
EPASWMM5 for Hydrology, Hydraulics and Water Quality
Time of Concentration Equations for #InfoSWMM and H2OMap SWMM
Introduction: H2OCalc is a hydrology and hydraulics calculator sold by Innovyze that has many of the equations and calculation methods used in InfoSWMM, ICM and SWMM5.
The dialog box for estimating time of concentration using Kirpich (Kipich sp) method is shown … Read the rest
Pump Calculations for #InfoSWMM and #SWMM5
Introduction: H2OCalc is a hydrology and hydraulics calculator sold by Innovyze that has many of the equations and calculation methods used in InfoSWMM, ICM and SWMM5. This is the H2OCalc information for Pumps.
A Pump is used to augment head to the system … Read the rest
Head loss due to Transitions and Fittings (Local loss)
Introduction: H2OCalc is a hydrology and hydraulics calculator sold by Innovyze that has many of the equations and calculation methods used in #InfoSWMM, #ICM and #SWMM5. This is the H2OCalc information for the Minor loss Equations.
Whenever flow velocity changes direction … Read the rest
Culverts in H2OCalc, background to Culverts in #InfoSWMM and #SWMM5
Introduction: H2OCalc is a hydrology and hydraulics calculator sold by Innovyze that has many of the equations and calculation methods used in InfoSWMM, ICM and SWMM5. This is the H2OCalc information for the FHWA Culvert Equations.
A culvert is a … Read the rest
InfoSewerH20Map Sewer recognizes two different types of Controls. They are as follows:
ยท Initial Status - Initial status prescribes the initial setting for a pump InfoSewerH20Map Sewer Project. This control on the element may be over written by the Simple … Read the rest
Steady-state analysis and design of storm sewers is usually accomplished under worst (i.e., peak) runoff conditions to test transporting capacity of the network without causing major flooding or overflows. The Rational method is the most widely used technique for estimation of peak flow … Read the rest
In the past few years, advances in infrastructure management technology have been occurring at an accelerated pace. This technology is now being realized within the context of sanitary and storm sewer modeling. It has allowed sewer collection system modeling … Read the rest
Pumps in InfoSewer and H20Map Sewer
A pump is a link that imparts energy to a fluid thereby raising its hydraulic head. Pumps are needed in a gravity sewer system to prevent deep excavations, and are designed to lift the fluid to a desired level that produces gravity flow condition … Read the rest
InfoSewerH20Map Sewer provides unparalleled network analysis and simulation capabilities for performing a wide range of essential modeling tasks. WithInfoSewerH20Map Sewer, the entire sewer collection system or any selected sub-system may be analyzed under steady state and extended period simulations. Please note the stormwater … Read the rest
Exporting To Sanitary Sewer Conveyance System Models for InfoSewer
InfoSewerH20Map Sewer /Pro can write the contents of a network model created in InfoSewerH20Map Sewer Pro to standard GIS formats (e.g., Shapefiles) for use in other applications.
This will prove useful for sharing your modeling efforts with your organization via enterprise … Read the rest