A few blogs on Force Mains and Pumps in InfoSWMM and InfoSewer:

1. The all-important Break Node - SWMM5 Link: This blog explains how to create a "break node" in SWMM5 and InfoSWMM for force mains.
2. Basic Rules -
   • SWMM5 Link 1
   • SWMM5 Link 2
   • SWMM5 Link 3
   • SWMM5 Link 4
   • SWMM5 Link 5
   • SWMM5 Link 6: These blogs outline the fundamental principles and guidelines for modeling pump and force main systems in InfoSWMM.
3. Siphons -
   • SWMM5 Link 1
   • SWMM5 Link 2: These blogs discuss how to simulate siphons in SWMM 5 and InfoSWMM.
4. Hazen Williams - SWMM5 Link: This blog discusses the use of the Hazen-Williams equation in SWMM 5.
5. Force Mains -
   • SWMM5 Link 1
   • SWMM5 Link 2
   • SWMM5 Link 3: These blogs delve into different types of force mains in SWMM 5 and how to model them.
6. Theory behind FM Transitions - SWMM5 Link: This blog discusses the theory of friction loss in force mains and the transition from partial to full flow.
7. **Pump SummarySure, here is the revised list:
8. The all-important Break Node - SWMM5 Link: This blog explains how to create a "break node" in SWMM5 and InfoSWMM for force mains.
9. Basic Rules -
   • SWMM5 Link 1
   • SWMM5 Link 2
   • SWMM5 Link 3
   • SWMM5 Link 4
   • SWMM5 Link 5
   • SWMM5 Link 6: These blogs outline the fundamental principles and guidelines for modeling pump and force main systems in InfoSWMM.
10. Siphons -
    • SWMM5 Link 1
    • SWMM5 Link 2: These blogs discuss how to simulate siphons in SWMM 5 and InfoSWMM.
11. Hazen Williams - SWMM5 Link: This blog discusses the use of the Hazen-Williams equation in SWMM 5.
12. Force Mains -
    • SWMM5 Link 1
    • SWMM5 Link 2
    • SWMM5 Link 3: These blogs delve into different types of force mains in SWMM 5 and how to model them.
13. Theory behind FM Transitions - SWMM5 Link: This blog discusses the theory of friction loss in force mains and the transition from partial to full flow.
14. **Pump SummarySure, here is the revised list:
15. The all-important Break Node - SWMM5 Link: This blog explains how to create a "break node" in SWMM5 and InfoSWMM for force mains.