How to Make a SWMM 5 Calibration File from InfoSWMM – ICM SWMM & ICM InfoWorks, SWMM5

How to Make a SWMM 5 Calibration File from InfoSWMM

4 Aug

How to Make a SWMM 5 Calibration File from InfoSWMM

By Storm/Sewer Modeler with a 45 yr association with EPASWMM. Now at Autodesk supporting InfoWorks ICM_SWMM Founder http://robertdickinson.org, Chair/TAC at http://CIMM.ORG #INFOSWMM , InfoSWMM , SWMM5 How to Make a SWMM 5 Calibration File from InfoSWMM No Comments

Subject: How to Make a SWMM 5 Calibration File from InfoSWMM

1^st Step: Graph a Link in InfoSWMM using the Date /Time Format

2^nd Step: Click on the Report Button and copy the 1^st two columns of data

3^rd Step: Save the copied columns to a data file, replace the semi colon and add the name of the link to the top of the data file as shown below

4^th Step: Connect the created calibration data file t o the SWMM 5 Calibration Data Link Flow Rate

5^th Step: Run the Simulation and you should see two graphs on the screen for the designated link

via Blogger http://www.swmm5.net/2013/08/how-to-make-swmm-5-calibration-file.html

Related

Storm/Sewer Modeler with a 45 yr association with EPASWMM. Now at Autodesk supporting InfoWorks ICM_SWMM Founder http://robertdickinson.org, Chair/TAC at http://CIMM.ORG

robert.dickinson@gmail.com

Storm/Sewer Modeler with a 45 yr association with EPASWMM. Now at Autodesk supporting InfoWorks ICM_SWMM

Leave a ReplyCancel reply

© 2024 - ICM SWMM & ICM InfoWorks, SWMM5 | Aneeq WordPress Theme By A WP Life | Powered By Blog at WordPress.com.

Translate »