Advanced Labeling in InfoSWMM or H2OMAP SWMM to show MM or IN on a HGL Plot

8 Aug

Advanced Labeling in InfoSWMM or H2OMAP SWMM to show MM or IN on a HGL Plot

By Storm/Sewer Modeler with a 45 yr association with EPASWMM. Now at Autodesk supporting InfoWorks ICM_SWMM Founder http://robertdickinson.org, Chair/TAC at http://CIMM.ORG #INFOSWMM , InfoSWMM , SWMM5 Advanced Labeling in InfoSWMM or H2OMAP SWMM to show MM or IN on a HGL Plot No Comments

Advanced Labeling in InfoSWMM or H2OMAP SWMM to show MM or IN on a HGL Plot

Here is how to get the maximum depth shown in millimeters or inches on a HGL Plot in InfoSWMM or H2OMAP SWMM– use the OTHER LINK Dimensions option. You need to run the model again to have your new diameter shown on the HGL plot. We use the output file to make the HGL plot and without a new model run the maximum depth will not be shown in either InfoSWMM or H2OMAP SWMM.

Keys:

Use Other Units instead of feet or meters, and

Use the Advanced Labeling in InfoSWMM or H2OMAP SWMM

via Blogger http://www.swmm5.net/2013/08/advanced-labeling-in-infoswmm-or-h2omap_8.html

ICM SWMM & ICM InfoWorks, SWMM5