The Effect of the LID Percent Impervious Treated in SWMM5
If you use the option percent impervious treated for LID’s on a Subcatchment then a percent of the impervious flow is routed to the LID. For example, 50 percent of roof runoff to a LID Swale. It has the impact of reducing the peak and total runoff fro the whole Subcatchment but increases the LID only flow. From the SWMM 5 help file “The percent of the impervious portion of the subcatchment’s non-LID area whose runoff is treated by the LID practice. (E.g., if rain barrels are used to capture roof runoff and roofs represent 60% of the impervious area, then the impervious area treated is 60%). If the LID unit treats only direct rainfall, such as with a green roof, then this value should be 0. If the LID takes up the entire subcatchment then this field is ignored”
If you use the option percent impervious treated for LID’s on a Subcatchment then a percent of the impervious flow is routed to the LID. For example, 50 percent of roof runoff to a LID Swale. It has the impact of reducing the peak and total runoff fro the whole Subcatchment but increases the LID only flow. From the SWMM 5 help file “The percent of the impervious portion of the subcatchment’s non-LID area whose runoff is treated by the LID practice. (E.g., if rain barrels are used to capture roof runoff and roofs represent 60% of the impervious area, then the impervious area treated is 60%). If the LID unit treats only direct rainfall, such as with a green roof, then this value should be 0. If the LID takes up the entire subcatchment then this field is ignored”
Figure 1. LID’s get 50 percent of the impervious flow which reduce the overall flow from the Subcatchments.
 |
| Figure 2. No Impervious Flow to the LID. |
via Blogger http://www.swmm5.net/2013/11/the-effect-of-lid-percent-impervious.html
You may also like
-
Innovyze Water Talk on 9/22 for ICM SWMM Networks
-
InfoSWMM Designer Tutorial
-
Features of the 1D St Venant solution for SWMM5, InfoSWMM, and ICM SWMM Networks
-
InfoSWMM 2D Exercises
-
How to Make an Internal Outfall into an External Outfall when you have more than one link connected to an Outfall in SWMM5 or InfoSWMM