Dummy Outfall for Dynamic Wave Models converted from Kinematic Wave Models in SWMM 5 – ICM SWMM & ICM InfoWorks, SWMM5

Dummy Outfall for Dynamic Wave Models converted from Kinematic Wave Models in SWMM 5

12 Jan

Dummy Outfall for Dynamic Wave Models converted from Kinematic Wave Models in SWMM 5

By Storm/Sewer Modeler with a 45 yr association with EPASWMM. Now at Autodesk supporting InfoWorks ICM_SWMM Founder http://robertdickinson.org, Chair/TAC at http://CIMM.ORG #INFOSWMM , InfoSWMM , SWMM5 Dummy Outfall for Dynamic Wave Models converted from Kinematic Wave Models in SWMM 5 No Comments

If you are using Kinematic Wave Routing in SWMM 5 you can switch to Dynamic Wave if you have any issues with a continuity error. There is on potential issue, however, as you need to have an outfall in your dynamic wave model. You can get around this issue by adding a dummy isolated outfall but it would be better to have an actual outfall.

Adding a Dummy Outfall in SWMM 5

via Blogger http://www.swmm5.net/2014/01/dummy-outfall-for-dynamic-wave-models.html

Related

Storm/Sewer Modeler with a 45 yr association with EPASWMM. Now at Autodesk supporting InfoWorks ICM_SWMM Founder http://robertdickinson.org, Chair/TAC at http://CIMM.ORG

robert.dickinson@gmail.com

Storm/Sewer Modeler with a 45 yr association with EPASWMM. Now at Autodesk supporting InfoWorks ICM_SWMM

Leave a ReplyCancel reply

© 2024 - ICM SWMM & ICM InfoWorks, SWMM5 | Aneeq WordPress Theme By A WP Life | Powered By Blog at WordPress.com.

Translate »