How to approximate a Steady State Model in SWMM5 and InfoSWMM using the Full Dynamic Wave Solution
The five core components of making this work correctly are:
- Short Period of Time,
- Constant inflow
- Either use a hot start file or delay the results by time period in the Run Manger
- Graph the Results
- The link and node components should be constant as shown in this image
You may also like
-
Junction DWF in SWMM5, InfoSWMM and ICM SWMM Networks
-
InfoSWMM Designer Tutorial
-
Features of the 1D St Venant solution for SWMM5, InfoSWMM, and ICM SWMM Networks
-
InfoSWMM 2D Exercises
-
How to Make an Internal Outfall into an External Outfall when you have more than one link connected to an Outfall in SWMM5 or InfoSWMM