InfoSWMM

Create Watersheds Using InfoSWMM Subcatchment Manager

Subject:  Create Watersheds Using InfoSWMM Subcatchment Manager

 

 

The Subcatchment Manager of InfoSWMM will  help calculate most of the  physical parameters associated with a Watershed or Subcatchment in SWMM 5 from a Digital Elevation Data (Step 1).  The Subcatchments area created from a Flow Direction Raster (Step 2) and a Flow Accumulation Raster (Step 4) after filling in any Sinks in the DEM (Step 3).  The created watersheds (Step 5).   The physical parameters estimated from the DEM are shown in Figure 1.

 

Figure 1.  Physical Data Estimated from a DEM using the Subcatchment Manager in InfoSWMM.

 

 

Step 1.  Find, Create or Otherwise Locate a TIN, DEM or DTM for the project area with elevation data that you can  use with the InfoSWMMSubcatchment Manager.

 

 

Step 2.   Create a Flow Direction Raster using the Watershed Command.

 

 

Step 3.   Check to see if there are Sinks in the Elevation Data that have to be filled using the Filled Sink Command.

 

 

Step 4.   Create a Flow Accumulation Raster

 

 

Step 5.   Create the Watersheds from the Flow Direction and Flow Accumulation Rasters.

 

 

 

via Blogger http://www.swmm5.net/2013/07/create-watersheds-using-infoswmm.html

Leave a Reply