InfoSewer Inflow Control for a Pump with a Pump Curve

InfoSewer Inflow Control for a Pump with a Pump Curve


You can control the pumps in InfoSewer and H2OMap Sewer by using a Pump Control which will control the pump based on: 

1.       Volume

2.      Level

3.      Discharge

4.     Inflow

5.      Time 

If you use a By Inflow control the pump speed of the pump is increased or decreased to make the Upstream Wet Well Level Constant (Figure 1) for an exponential 3 point curve


Figure 1.  Inflow Control for  PUMP in InfoSewer and H2OMAP Sewer will change the Pump Speed of the pump to make the Wet Well level constant

via Blogger http://www.swmm5.net/2013/07/infosewer-inflow-control-for-pump-with.html

Leave a Reply