InfoSWMM

LPS Output Units when the Inflow is CMS in InfoSWMM and H2OMap SWMM

LPS Output Units when the Inflow is CMS

1.   The inflow time series is in units of CMS,
2.   If you set the internal units to LPS in Run Manager,
3.   Set the output units to LPS in Output Unit Manager,
4.   Add a Scale multiplier of 1000 in the Inflows DB Table then

The inflows do not have to be altered, the internal model flows will LPS, the velocity will be m/s with 6 decimal places in the RPT file and the flows will be LPS with 3 decimal places in the RPT file. 

via Blogger http://www.swmm5.net/2013/07/lps-output-units-when-inflow-is-cms-in.html

Leave a Reply