Note:  Tributary Area to a Node in SWMM 5 or InfoSWMM

Here are the steps you neeed to take to calculate the tributary area of a node in InfoSWMM:

Step 1:  Use the DB Editor to get the total area in your model using the Data Statistics Tool.

Step 2:  Use the Process options in InfoSWMM to ONLY simulate surface runoff and flow routing.

Step 3. Copy the Node name and Total Inflow Volume from the Juntion Summary Output Table to Excel

Step 4:  Find the Total Wet Weather Flow during the simulation from the Wet Weather Inflow Row in the Flow Continuity Table.

Dry Weather Inflow   0.000  0.000

Wet Weather Inflow  0.782   0.255

Step 5. Make a new column in Excel to calculate the tributary area.

The Tributary Area of a Node = Total Inflow Volume / Total Wet Weather Flow * Total Subcatchment Area from Step 1.

You will now have the tributary area for each node.  You can verify this number = the total tributary area at the outfalls should equal the Total Subcatchment Areafrom Step 1.

		Maximum	Maximum
		Lateral	Total	Time	of	Lateral	Total	Tributary
		Inflow	Inflow	Occurrence	Volume	Inflow	Inflow	Area
Node	Type	CFS	CFS	days	hr:min	10^6 gal	10^6 gal	acres
P001	JUNCTION	5.54	10.86	0	2:27	0.1	0.255	14.74
P005	JUNCTION	2.14	7.42	0	2:26	0.039	0.155	8.96
P009	JUNCTION	5.78	5.78	0	2:25	0.106	0.106	6.13
P011	JUNCTION	0.7	0.7	0	2:34	0.01	0.01	0.58
OUTLET	OUTFALL	0	10.84	0	2:28	0	0.255	14.74

via Blogger http://www.swmm5.net/2013/07/tributary-area-to-node-in-swmm-5-or.html