Subject: How to Make a Small Model out of a Large Model in H2OMAP Sewer
The process is easy if you use Domain and Facilities.
Step 1. Use the Trace Upstream Network Command in Utilities to find the upstream network from your node of interest. The upstream network is saved to a Domain.
Step 2. Use the Facility Manager to 1st deactivate the whole network and then 2nd to add the Domain to your Facility or the nodes and links that you will simulate
You now have a smaller network to examine in Detail. You may have to make a temporary Outfall node to run the model if there are no Outfalls in the model.
via Blogger http://www.swmm5.net/2013/08/how-to-make-small-model-out-of-large.html
You may also like
-
How to Setup RDII in InfoSewer Pro (Storms)
-
How to ReMake an IEDB Folder for InfoSewer
-
How to Make an Internal Outfall into an External Outfall when you have more than one link connected to an Outfall in SWMM5 or InfoSWMM
-
New Domain Nodes and Links in InfoSewer
-
How to Use Population for DWF in SWMM5 and InfoSWMM