SWMM5

Outlets in SWMM 5 can have reverse flow

/ SWMM5

Outlets in SWMM 5 can have reverse flow

Outlets in SWMM 5 can have reverse flow (1) if the downstream head is greater than the upstream head (2), a flap gate (3) will prevent the flow reversal (4). An outlet can have both positive and negative flow as long as … Read the rest

Hydrology, InfoSWMM, RTC, SWMM5

Arizona Tourist Destination Selects InfoSWMM for Advanced Wastewater Network Modeling and Management

/ Hydrology, InfoSWMM, RTC, SWMM5
Innovyze Press Release
??Insider BlogLinkedInTwitterYouTube
Arizona Tourist Destination Selects InfoSWMM for Advanced Wastewater Network Modeling and Management
Decision Arms Bullhead City with Comprehensive GIS-Centric Solution for Managing its Sewer Infrastructure System
Broomfield, Colorado USA, January 22, 2013???????Innovyze, a leading global innovator of
… Read the rest
SWMM5

Climate-proofing cities

/ SWMM5

Here's just one example, from Singapore:

Singapore's Marina Barrage.RnD.de.PortraitsSingapore's Marina Barrage.

The Marina Barrage and Reservoir, which opened in 2008, is at the heart of Singapore's two-billion-dollar campaign to improve drainage infrastructure, reduce the size of flood-prone areas, and enhance the quality of city life. It has nine operable crest gates,

… Read the rest
SWMM5

This blog 2012 in review

/ SWMM5

The WordPress.com stats helper monkeys prepared a 2012 annual report for this blog.

Here’s an excerpt:

4,329 films were submitted to the 2012 Cannes Film Festival. This blog had 14,000 views in 2012. If each view were a film, this blog would power 3 Film Festivals

Click here to see … Read the rest

SWMM5

Singapore – Catching Every Drop of Rain

/ SWMM5

Singapore – Catching Every Drop of Rain

The source of the map of the rivers of Singapore is the Singapore PUB

As a small island that doesn’t have natural aquifers and lakes and with little land to collect rainwater, Singapore needs to maximize whatever it can harvest.

Currently, Singapore uses … Read the rest

SWMM5

Maximum HGL Head Class in InfoSWMM AND H2OMAP SWMM

/ SWMM5

Maximum HGL Head Class in InfoSWMM AND H2OMAP SWMM

You can find the node flood or surcharge maximum occurrence during a simulation in the Junction Summary Report table in InfoSWMM and H2OMAP SWMM (Figure 1)

Empty if the Node Head is below or equal to the Lowest Link Connecting Elevation… Read the rest

InfoSewer

Inflow Control for PUMP in InfoSewer

/ InfoSewer

InfoSewer Inflow Control for a PUMP

 You can control the pumps in InfoSewer and H2OMap Sewer by using a Pump Control which will control the pump based on: 

1.       Volume

2.      Level

3.      Discharge

4.      Inflow

5.      Time 

If you use a

… Read the rest
InfoSewer

InfoSewer Minimum Travel Distance Sensitivity

/ InfoSewer
InfoSewer Minimum Travel Distance Sensitivity
The three Run manager parameters, Maximum Number of Segments, Minimum Travel Distance and the Minimum Travel Time in InfoSewer and H2OMAP Sewer affect the shape and flow attenuation of the flow in a link.  The effect of decreasing the Minimum Travel Distance is to reduce
… Read the rest
InfoSewer

InfoSewer Maximum Number of Segments Sensitivity

/ InfoSewer
InfoSewer Maximum Number of Segments Sensitivity
The three Run manager parameters, Maximum Number of Segments, Minimum Travel Distance and the Minimum Travel Time in InfoSewer and H2OMAP Sewer affect the shape and flow attenuation of the flow in a link.  The effect of altering the Maximum Number of Segments is
… Read the rest
InfoSewer

InfoSewer Flow Attenuation Sensitivity

/ InfoSewer
InfoSewer Flow Attenuation Sensitivity 
The three Run manager parameters, Maximum Number of Segments, Minimum Travel Distance and the Minimum Travel Distance in InfoSewer and H2OMAP Sewer affect the shape and flow attenuation of the flow in a link.  The effect of using the flow attenuation is to reduce the peak
… Read the rest
Translate »
Scroll to Top