Category: SWMM5

How to Use Database Tools for InfoSWMM and InfoSWMM SA- Including Critical Model Recovery (CMR)

How to Use Database Tools for InfoSWMM and InfoSWMM SA- Including Critical Model Recovery (CMR)

The database tools submenu is provided to assist the user in database management. InfoSWMM H2OMap SWMM InfoSWMM SA project is grounded upon the linkage between graphical network representation and external databases. Unfortunately, the data contained … Read the rest

How to Use EPA SWMM 5 Water Quality Washoff and Buildup Features

EPA SWMM 5 Water Quality

SWMM5 water quality can simulate the generation, inflow and transport of any number of user-defined pollutants. Required information for each pollutant includes:

1 pollutant name
2 concentration units (i.e., milligrams/liter, micrograms/liter, or counts/liter)
3 concentration in rainfall
4 concentration in groundwater
5 concentration in
Read the rest

SWMM5 Conversion – Subcatchments from SWMM 5 in InfoWorks ICM

SWMM5 Conversion – Subcatchments from SWMM 5 in InfoWorks ICM

Information from the following sections of the SWMM5 project file are imported to InfoWorks ICM Subcatchment objects:

[SUBCATCHMENTS]

[POLYGONS]

[SUBAREAS]

[INFILTRATION]

[HYDROGRAPHS]

[RDII]

[SUBCATCHMENTS] Section

SWMM5 [SUBCATCHMENTS] are imported as InfoWorks ICM Subcatchments.

Geometry of the Subcatchment boundary is … Read the rest

Simulation Task Manager in InfoSWMM and InfoSWMM SA for Background Simulation Runs with 32 bit or 64 bit Engines using the current SWMM5 Engine

Simulation Task Manager in InfoSWMM and InfoSWMM SA for Background Simulation Runs with 32 bit or 64 bit Engines using the current SWMM5 Engine

The Simulation Task Manager is used to allow you to continue to work in the model while a simulation is running. The tool manages all of … Read the rest

Run Manager in InfoSWMM and InfoSWMM SA for 32 bit, 64 bit, Multi Core, Batch and Simulation Manger Model Runs using the current SWMM 5 Engine

Run Manager in InfoSWMM and InfoSWMM SA for 32 bit, 64 bit, Multi Core, Batch and Simulation Manger Model Runs using the current SWMM 5 Engine

The Run Manager, shown below, is used to perform InfoSWMM H2OMap SWMM InfoSWMM SA simulations and to manage simulation output sources (results). When you … Read the rest

#LID Defaults from the EPA SWC for InfoSWMM, InfoSWMM SA and SWMM5

#LID Defaults from the EPA SWC for InfoSWMM, InfoSWMM SA and SWMM5

The following defaults are from the EPA Stormwater Calculator

https://www.epa.gov/water-research/national-stormwater-calculator

A few of these parameters such as the capture ratio are not parameters in InfoSWMM Sustain

There are some additional points to keep in mind when applying LID … Read the rest

Translate »