Note: Flow Units In InfoSWMM may be different then the Output Link Flow Units
The flows units selected in Run Manager determines the flow units of all incoming units including DWF, Inflow Time Series and other features in pump curves and other curves. The output unit manager determines what you … Read the rest
Note: Export from WeatherUnderground using the CSV File Export Option to InfoSWMM
Weather Underground is a site that provides excellent local weather information in the form of graphs, tables and csv files. You can use the data very easily in InfoSWMM by copying from Excel to a time series in … Read the rest
1st The time step you use in SWMM 5 is controlled from the top by the rainfall interval (Figure 1):
1. All of your time steps should be less than the rainfall interval,
2. The hydrology time step should be less … Read the rest
InfoSewer Flow Attenuation Sensitivity
The three Run manager parameters, Maximum Number of Segments, Minimum Travel Distance and the Minimum Travel Distance in InfoSewer and H2OMAP Sewer affect the shape and flow attenuation of the flow in a link. The effect of using the flow attenuation is to reduce the peak … Read the rest
InfoSewer Inflow Control for a PUMP
You can control the pumps in InfoSewer and H2OMap Sewer by using a Pump Control which will control the pump based on:
1. Volume
2. Level
3. Discharge
4. Inflow
5. Time
If you use a By Inflow control the pump speed of the … Read the rest
InfoSewer Maximum Number of Segments Sensitivity
The three Run manager parameters, Maximum Number of Segments, Minimum Travel Distance and the Minimum Travel Distance in InfoSewer and H2OMAP Sewer affect the shape and flow attenuation of the flow in a link. The effect of decreasing the Minimum Travel Distance is to … Read the rest
Here is a new tool, based on SWMM, that may be of interest. It provides non-modelers with a quick and easy way to rigorously estimate stormwater runoff volumes from their properties. For you SWMM experts, it
This is an example SWMM 5 model that can be imported into InfoSWMM or H2OMap SWMM using the Exchange/Import Command. The low flow falls over the berm of the leaping weir into a rectangular open channel but the the "falls"
 |
| Use Select All, Group Delete and the Tag Feature |
Calibration data in H2OMAP SWMM, InfoSWMM and SWMM 5 does NOT have to be at the same time step pic.twitter.com/S1leombWqs
— RDickinson (@RDickinson) July 1, 2013
via Blogger http://www.swmm5.net/2013/07/calibration-data-in-h2omap-swmm.html… Read the rest
Happy Canada Day, A SWMM 5 Model with Canada Day as the WaterMark along with an Interesting SWMM 5 Model with Flow Dividers - it only works in Kinematic Wave Mode
Flow Divider Inp File
Canada Day Image
via Blogger … Read the rest
Check out my animated twitter snapshot. https://t.co/G5L0jwPAJ1
— RDickinson (@RDickinson) June 26, 2013
via Blogger http://www.swmm5.net/2013/06/check-out-my-animated-twitter-snapshot.html… Read the rest
You can use the command *Utility/Network Review Fix/Locate Parallel Pipe/Show as Domain *or as list of ID's
 |
| Utility/Network Review Fix/Locate Parallel Pipe/Show as Domain |
Two Pass InfoSewer Solution
The d/D you are Mapping is from the 1st pass or the solution in which the manhole loads are calculated and the program estimates the flow in the links – the flow gives the value of d/D which you are mapping.
The HGL plot is
The meaning of Geom1, Geom2, Geom3 and Geom4 in InfoSWMM and H2OMap SWMM pic.twitter.com/ChdI3IQq6t
— RDickinson (@RDickinson) June 21, 2013
… Read the restPhoto: mishagl: All of the rivers - Perhaps inspired by All Streets, Ben Fry’s map of all the streets in the... http://t.co/4xO9KdIdtP
— RDickinson (@RDickinson) June 20, 2013
Liu Yang introduces delegates to GIS-Based design solution InfoSewer at a packed @innovyze UK User Group http://t.co/wD4Y11Wnkx
— Innovyze (@Innovyze) June 19, 2013
H2S Modeling in InfoSewer, the basic model needs pic.twitter.com/OyfeMekrUU
— RDickinson (@RDickinson) June 17, 2013