EPASWMM5, Autodesk InfoWorks ICM_SWMM & ICM
EPASWMM5 for Hydrology, Hydraulics and Water Quality
| Introducing EPA SWMM5 |
The EPA Storm Water Management Model (SWMM) is a dynamic rainfall-runoff simulation model used for single event or long-term (continuous) simulation of runoff quantity and quality from primarily urban areas. The runoff component of SWMM operates on a collection of subcatchment areas that receive precipitation and generate … Read the rest
| Snowmelt |
Snowmelt parameters are climatic variables that apply across the entire study area when simulating snowfall and snowmelt. They include:
| ยท | the air temperature at which precipitation falls as snow |
| ยท | heat exchange properties of the snow surface |
| ยท | study area elevation, latitude, and longitude correction. |
See … Read the rest
| Using Add-In Tools |
SWMM 5 has the ability to launch external applications from its graphical user interface that can extend its capabilities. This section describes how such tools can be registered and share data with SWMM 5.
| Tools Menu |
The Tools Menu contains commands used to configure … Read the rest
| Working with Objects |
SWMM uses various types of objects to model a drainage area and its conveyance system. This section describes how these objects can be created, selected, edited, deleted, and repositioned.
… Read the restFlow routing within a conduit link in SWMM is governed by the conservation of mass and momentum equations for gradually varied, unsteady flow (i.e., the Saint Venant flow equations). The SWMM user has a choice on the level of sophistication … Read the rest
| Climatology |
The Climatology object in EPA SWMM describes the following climate-related variables used for computing runoff and snowmelt:
| · | Temperature |
| · | Evaporation |
| · | Wind Speed |
| · | Snowmelt |
| · | Areal Depletion |
| · | Climate Adjustments |
| Rain Gages |
Rain Gages supply precipitation data for one or more subcatchment areas … Read the rest
| Aquifers |
Aquifers are sub-surface groundwater zones used to model the vertical movement of water infiltrating from the subcatchments that lie above them. They also permit the infiltration of groundwater into the drainage system, or exfiltration of surface water from the drainage system, depending on the hydraulic gradient … Read the rest
| Non-visual Objects |
In addition to physical objects that can be displayed visually on a map, SWMM utilizes several classes of non-visual data objects to describe additional characteristics and processes within a study area.
| · | Climatology Data |
| · | Hydrology Data |
| · | Hydraulic Data |
| · | Water Quality Data |
| Links |
Links are the conveyance components of a drainage system and always lie between a pair of nodes. Types of links include:
| · | Conduits |
| · | Pumps |
| · | Regulators |
| Conduits |
Conduits are pipes or channels that move water from one node to another in the conveyance system. Their … Read the rest