Author Archives

Robert Dickinson

Innovyze Enabler for InfoSWMM, ICM SWMM Networks, SWMM in ICM, XPSWMM, Helped Develop EPASWMM 3,4,5

An easy test for SWMM5 versions using the Status Report Message for Unrecognized Keywords in past SWMM5 GUI

An easy test for SWMM5 versions using the Status Report Message for Unrecognized Keywords in past SWMM5 GUI

SWMM 5.1.012 reading SWMM 5.1.013 Inp Files

SWMM 5.1.011 reading SWMM 5.1.013 Inp Files

SWMM 5.1.010 reading SWMM 5.1.013 Inp Files

SWMM 5.1.009 reading SWMM 5.1.013 Inp Files

SWMM 5.1.008 reading SWMM Read the rest

SWMM 5.1 Update History up to SWMM 5.1.013 and Link to New EPASWMM 5.1013 Install

SWMM 5.1 Update History

New SWMM 5.1.013 is now available http://t.co/v8QVy5c3UI

Build 5.1.013 (05/10/18)

------------------------

 

Engine Updates:

  1. A subcatchment's depression storage depth, its pervious surface roughness

(Mannings n) and its hydraulic conductivity can now be adjusted on a

monthly basis by assigning monthly time patterns to these properties.

For … Read the rest

A Summary of Blogs on Force Mains and Pumps in InfoSWMM and InfoSewer

A few blogs on Force Mains and Pumps in InfoSWMM and InfoSewer:

The all-important Break Node

https://swmm5.org/2015/02/08/how-to-make-a-break-node-in-swmm5-and-infoswmm-for-force-mains/

Basic Rules

https://swmm5.org/2015/02/07/pump-and-force-main-system-in-infoswmm/

https://swmm5.org/2013/07/28/pump-force-main-system-in-infoswmm-and-swmm-5/

https://swmm5.org/2016/09/15/a-visual-look-at-a-series-of-hw-force-mains-in-infoswmm-and-swmm5/

https://swmm5.org/2013/12/26/rules-for-force-mains-in-infosewer-and-h2omap-sewer/

https://swmm5.org/2016/09/04/pumps-in-infosewer-and-h20map-sewer/

https://swmm5.org/2018/04/08/how-to-force-swmm5-to-use-only-the-wet-well-area-for-a-pump/

Siphons

https://swmm5.org/2013/08/10/siphon-simulation-in-swmm-5-and-infoswmm/

https://swmm5.org/2016/09/05/siphon-modeling-in-infosewer-and-arc-map/

Hazen Williams

https://swmm5.org/2013/10/06/hazen-williams-and-force-mains-in-swmm-5/

Force Mains

https://swmm5.org/2013/08/09/what-are-the-types-of-force-mains-fm-in-swmm-5/

https://swmm5.org/2013/08/04/comparison-of-the-h2omap-swmm5-hazen-williams-force-main-solution-to-a-hw-solution/

https://swmm5.org/2015/02/08/advanced-force-main-solution-and-gravity-main-attenuation-in-infosewer-for-better-pump-force-main-gravity-main-simulations/

Theory behind FM Transitions

https://swmm5.org/2013/08/05/force-main-friction-loss-in-infoswmm-and-the-transition-from-partial-to-full-flow/

Pump Summary Table

https://swmm5.org/2013/08/10/infoswmm-pump-summary-table/

RTC Rules

https://swmm5.org/2016/09/26/setting-controls-for-the-pump-and-orifice-in-infoswmm-and-swmm5/

https://swmm5.org/2013/08/03/how-to-see-the-effect-of-the-pump-setting-in-the-rtc-rules-of-infoswmm-and-h20map-swmm/

https://swmm5.org/2016/09/05/real-time-control-rtc-rule-editor-in-infoswmm-for-swmm5-control-rules/Read the rest

Translate »