#INFOSWMM
Arc Map If Statements for Showing Flooding in InfoSWMM
You can use a combination of the Map Display in InfoSWMM and the Arc Map Label Properties to show the Maximum Ponded Volume at a node during amInfoSWMM simulation.
The label function in VBSCRIPT to show just non zero flooded … Read the rest
Steps to set up a new icon for Batch Simulation in InfoSewer, InfoSWMM or InfoWater
1. Customize Arc GIS
2. Add an Icon
3. Run the command using the Icon
via Blogger http://www.swmm5.net/2013/07/batch-simulation-for-infosewer-infoswmm.html… Read the rest
Subject: Risk Assessment Manager in InfoSWMM
If you can get the Risk Assessment Manager than you can do a flooding extent based on the Maximum Head or just the Flooded Nodes.
via Blogger http://www.swmm5.net/2013/07/risk-assessment-manager-in-infoswmm.html… Read the rest
Subject: What are the Units for the five St. Venant Flow Terms in SWMM 5 and InfoSWMM?
The new flow (Q) calculated at during each iteration of time step as
(1) Q for the new iteration = (Q at the Old Time Step – DQ2 + DQ3 + … Read the rest
Note: Export from WeatherUnderground using the CSV File Export Option to InfoSWMM
Weather Underground is a site that provides excellent local weather information in the form of graphs, tables and csv files. You can use the data very easily in InfoSWMM by copying from Excel to a time series in … Read the rest
1st The time step you use in SWMM 5 is controlled from the top by the rainfall interval (Figure 1):
1. All of your time steps should be less than the rainfall interval,
2. The hydrology time step should be less … Read the rest
This is an example SWMM 5 model that can be imported into InfoSWMM or H2OMap SWMM using the Exchange/Import Command. The low flow falls over the berm of the leaping weir into a rectangular open channel but the the "falls"
Calibration data in H2OMAP SWMM, InfoSWMM and SWMM 5 does NOT have to be at the same time step pic.twitter.com/S1leombWqs
— RDickinson (@RDickinson) July 1, 2013
via Blogger http://www.swmm5.net/2013/07/calibration-data-in-h2omap-swmm.html… Read the rest
You can use the command *Utility/Network Review Fix/Locate Parallel Pipe/Show as Domain *or as list of ID's
 |
| Utility/Network Review Fix/Locate Parallel Pipe/Show as Domain |
The meaning of Geom1, Geom2, Geom3 and Geom4 in InfoSWMM and H2OMap SWMM pic.twitter.com/ChdI3IQq6t
— RDickinson (@RDickinson) June 21, 2013
… Read the restHow to Estimate the Needed Time Step for your Model using DB Tools in InfoSWMM pic.twitter.com/zpoZyNPQaq
— RDickinson (@RDickinson) June 14, 2013
How to simulate a Quasi Steady Run in InfoSWMM, H2OMap SWMM or SWMM 5 pic.twitter.com/4un4P19HFo
— RDickinson (@RDickinson) June 14, 2013
… Read the restSteps in Merging Two InfoSWMM Models without any Scenariostwitpic.com/cwik9h
— RDickinson (@RDickinson) June 10, 2013
1. The RDII Hydrograph component of
Five Parameters beside the Maximum Time Step that help control simulation length in InfoSWMM and SWMM 5twitpic.com/crhplq
— RDickinson (@RDickinson) May 18, 2013
FYI, If you like twitter and like to center your embeded tweets add this to the custom twitter code How to center your embedded tweets class="twitter-tweet