Tag: H2oMAP SWMM
How to Define Green Ampt Infiltration in ICM
1. You use the Subcatchment, Land Use and Runoff Surface Tabs in the Subcatchment Grid (Bullet 1)
2. The Subcatchment Tab has three Runoff Areas for Impervious with Depression Storage or Initial Loss, Impervious with no
Batch Simulation for InfoSewer, InfoSWMM or InfoWater, H2oMap SWMM, H2OMap Sewer and H2OMap Water
Steps to set up a new icon for Batch Simulation in InfoSewer, InfoSWMM or InfoWater
1. Customize Arc GIS
2. Add an Icon
3. Run the command using the Icon
via Blogger http://www.swmm5.net/2013/07/batch-simulation-for-infosewer-infoswmm.html… Read the rest
How to Locate Parallel Pipes in H2OMAP SWMM
You can use the command *Utility/Network Review Fix/Locate Parallel Pipe/Show as Domain *or as list of ID's
Live Link between the HGL Plot in InfoSWMM and the DB Tables/ Attribute Browser
Live Link between the HGL Plot in InfoSWMM and the DB Tables/ Attribute Browser twitpic.com/cbygp8
— RDickinson (@RDickinson) March 17, 2013
Maximum HGL Head Class in InfoSWMM AND H2OMAP SWMM
Maximum HGL Head Class in InfoSWMM AND H2OMAP SWMM
You can find the node flood or surcharge maximum occurrence during a simulation in the Junction Summary Report table in InfoSWMM and H2OMAP SWMM (Figure 1)
Empty if the Node Head is below or equal to the Lowest Link Connecting Elevation… Read the rest
Global Dry Weather Flow Reduction in InfoSWMM and H2OMAP SWMM
Global Dry Weather Flow Reduction in InfoSWMM and H2OMAP SWMM
A cool tip to reduce the overall dry weather flow in InfoSWMM and H2OMAP SWMM without changing the mean dry weather flow is to do the following:
1. Make a Reduction or Increase Flow Pattern in the Operations tab of … Read the rest