EPASWMM5, Autodesk InfoWorks ICM_SWMM & ICM
EPASWMM5 for Hydrology, Hydraulics and Water Quality
The following defaults are from the EPA Stormwater Calculator
https://www.epa.gov/water-research/national-stormwater-calculator
A few of these parameters such as the capture ratio are not parameters in InfoSWMM Sustain
There are some additional points to keep in mind when applying LID … Read the rest
3.12 Culverts from H2OCalc for InfoSWMM, InfoSWMM SA and SWMM5
A culvert is a pipe that carries water under or through some feature (usually a road or highway) that would otherwise block the flow of water. The culvert acts as an open channel as long as the flow is partly … Read the rest
Operational control rules determine how pumps and flow regulating structures (i.e., orifice and weir) in the conveyance system will be adjusted over the course of a simulation. InfoSWMM H2OMap SWMM InfoSWMM SA has the following three control classes.
· Initial Status - The initial status editor enables specification … Read the rest