Importing Diameters into #H2OMAP SWMM and #InfoSWMM
The current option for showing closed conduit diameters in both H2OMAP SWMM and InfoSWMM is controlled by the Tools/Preferences dialog option Sewer Interface (Figure 1). The diameter for the closed conduits is shown in feet or meters in the DB table (Figure 2) … Read the rest
The Junction inlet data table stores information regarding the inlet at the junction node. Refer to the section on inflow editor for more information on these input data. The following table shows the whole first row of the DB Table on separate rows in the image.
In this blog we example the St Venant terms used in SWMM5 as equations, table, graphs and units. We use a QA/QC version of SWMM 5 that lists many more link, node, system and Subcatchment variables than the default SWMM 5 GUI and engine. This also applies to #InfoSWMM
SWMM 5 uses the method of Successive under-relaxation to solve the Node Continuity Equation and the Link Momentum/Continuity Equation for a time step. The dynamic wave solution in dynwave.c will use up to 8 … Read the rest
This blog shows how to display multiple link parameters.
The 1st method would be to use Arc Map Layer properties and label multiple parameters for each gravity main or force main. The image below shows and example and here is the code inside of … Read the rest