SWMM5

#INFOSWMM, InfoSWMM, SWMM5

How to Make Scatter Graphs in InfoSWMM and H2OMap SWMM

January 17, 2015 / #INFOSWMM, InfoSWMM, SWMM5

How to Make Scatter Graphs in InfoSWMM and H2OMap SWMM by Robert E Dickinson

https://www.scribd.com/embeds/252871519/content?start_page=1&view_mode=scroll&access_key=key-fiY8cHQfELlSKTHr2x37&show_recommendations=true… Read the rest

ARC GIS, InfoSWMM, SWMM5

Create Watershed Data Using the InfoSWMM Subcatchment Manager

January 10, 2015 / ARC GIS, InfoSWMM, SWMM5

Subject: Create Watershed Data Using the InfoSWMM Subcatchment Manager

The Subcatchment Manager of InfoSWMM will help calculate most of the physical parameters associated with a Watershed or Subcatchment in SWMM 5 from a Digital Elevation Data (Step 1). The Subcatchments slope is estimated from a slope raster (Step 2) and the Slope Calculator (Step 4). The created

… Read the rest

InfoSWMM, SWMM5

Innovyze Unveils InfoSWMM Sustain for Comprehensive Urban Stormwater Treatment and Analysis

January 6, 2015 / InfoSWMM, SWMM5

Innovyze Press Release

Press Room | Products | News | Events | The Company

Innovyze Unveils InfoSWMM Sustain for Comprehensive Urban Stormwater Treatment and Analysis

New Software Lets Stormwater Management Professionals Determine Optimal BMP Combinations at Various Watershed Scales Based on Cost and Effectiveness

Broomfield, Colorado, USA, January 6, 2014 — Innovyze,

… Read the rest

#INFOSWMM, InfoSWMM, SWMM5

How does Conduit Lengthening Work in SWMM5?

January 3, 2015 / #INFOSWMM, InfoSWMM, SWMM5

Conduit Lengthening in SWMM 5
If you use the conduit lengthening option in SWMM 5 then your short conduits will be lengthened based on the CFL or explicit time step criterion. Any conduits in which the Length Factor or the courant time step link length over the original length is

… Read the rest

#INFOSWMM, InfoSWMM, SWMM5

3D and 2D Bar graphs of the Process components in InfoSWMM

January 1, 2015 / #INFOSWMM, InfoSWMM, SWMM5

The new InfoSWMM and H2OMap SWMM v13 graphics allow you to easily make 3D and 2D Bar graphs of the Process components in the model. The possible processes and the output of the processes can be seen in the Routing Continuity Output Table (Figure 1). You can make both 3D

… Read the rest

#INFOSWMM, InfoSWMM, SWMM5

What does Percent Not Converging Mean in SWMM5?

January 1, 2015 / #INFOSWMM, InfoSWMM, SWMM5

In SWMM 5 there is a Routing time step summary which tells the modeler the minimum time step during the simulation based on the CFL condition, the average time step, maximum time step, the percent of time spent in steady state, the average iterations per step and the percent not

… Read the rest

#INFOSWMM, InfoSWMM, SWMM5

How to Make a Trapezoidal Inflow Time Series in InfoSWMM

December 30, 2014 / #INFOSWMM, InfoSWMM, SWMM5

You can make a Trapezoidal shaped Time Series in InfoSWMM by using the following steps:

Use the Inflow Icon at a Node in the Attribute Browser
Use either an Inflow Time series with date/time/value or
A baseline flow value with a pattern
The time series comprise a Date that matches

… Read the rest

#INFOSWMM, InfoSWMM, SWMM5

The EPA SWMM 5 code and the various versions of Visual Studio

December 29, 2014 / #INFOSWMM, InfoSWMM, SWMM5

The EPA SWMM 5 code and the various versions of Visual Studio. If you have multiple versions of Visual Studio on your computer you might have toolset issues. Visual Studio 2010 and 2012 are for Windows 7, Visual Studio 2013 is for Windows 8

Visual Studio 2012 uses the v11

… Read the rest

InfoSWMM, Innovyze, SWMM5

InfoSWMM Story 1 on Storirfy

December 26, 2014 / InfoSWMM, Innovyze, SWMM5

//storify.com/RDickinson/rdickinson-infoswmm-story/embed[View the story "Rdickinson InfoSWMM Story" on Storify]

via Blogger http://ift.tt/1wrzn3m… Read the rest

#INFOSWMM, InfoSWMM, SWMM5

How to Make Scatter Graphs in InfoSWMM and H2OMap SWMM

December 25, 2014 / #INFOSWMM, InfoSWMM, SWMM5

How to Make Scatter Graphs in InfoSWMM and H2OMap SWMM

Scatter graphs of velocity on the X axis and depth on the Y axis are important to help understand the reason for flow/depth relationships in flow surveys. You can make a scatter graph in InfoSWMM by plotting the link flow

… Read the rest

ARC GIS, History, InfoSWMM, SWMM5

Innovyze Releases InfoMaster V5.0 With Extended Work Order Management, Valve Criticality Analysis, Linear Extended Yule Process Pipe Failure Model

December 16, 2014 / ARC GIS, History, InfoSWMM, SWMM5

Innovyze Press Release

Press Room | Products | News | Events | The Company

Innovyze Releases InfoMaster V5.0 With Extended Work Order Management, Valve Criticality Analysis, Linear Extended Yule Process Pipe Failure Model

Highly Advanced Analytical Asset Management Tool Optimizes Water/Sewer Network Rehabilitation Prioritization, Capital Planning Programs for Sustainable Infrastructures

Broomfield, Colorado,

… Read the rest

History, ICM, Innovyze, SWMM5

Innovyze Retires InfoWorks CS with Launch of More Powerful Next-Generation InfoWorks ICM SE Collection Systems Modeling Software

December 2, 2014 / History, ICM, Innovyze, SWMM5

Innovyze Press Release

Press Room | Products | News | Events | The Company

Innovyze Retires InfoWorks CS with Launch of More Powerful Next-Generation InfoWorks ICM SE Collection Systems Modeling Software

New InfoWorks ICM SE Poised to Dominate Sanitary, Storm and Combined Sewer Modeling and Management for Next Decade and Beyond

Broomfield,

… Read the rest

#INFOSWMM, InfoSWMM, SWMM5

A rise in Pipe Inverts Across a SWMM 5 Node, What Node and Link Invert Elevations Does SWMM 5 Use?

November 29, 2014 / #INFOSWMM, InfoSWMM, SWMM5

A rise in Pipe Inverts Across a SWMM 5 Node

Subject: This is how SWMM 5 handles jumps in pipe invert across a node.

The water surface in the node determines the flow in the link, as the depth increases due to upstream inflow eventually the downstream link will

… Read the rest

InfoSWMM, SWMM5

@RDICKINSON TWITTER Collection for November 30, 2014

November 29, 2014 / InfoSWMM, SWMM5

“Charting your Smart Water Strategy” Webcasts by @Innovyze @H2OandEnergy @AriOpdahl http://t.co/T5JzjbMjKX http://pic.twitter.com/2mHlGVRd9h
— Robert E Dickinson (@RDickinson) November 26, 2014

Baseline replacement costs for pipes from @AriOpdahl our PSL for InfoMaster at @Innovyze http://pic.twitter.com/v5Am85id5f
— Robert E Dickinson (@RDickinson) November 29, 2014

The Beauty of Pop Ups in @adobe-robohelp

… Read the rest

InfoSWMM, SWMM5

Charting Your Smart Water Strategy by Innovyze

November 26, 2014 / InfoSWMM, SWMM5

InfoMaster Webinar

Smart Water technology continues to evolve at an astounding pace with new solutions entering the market promising huge energy savings, accounting for every drop of water, predicting pipeline failures, and more. The promise and hype of smarter water systems have intrigued many utilities, but adoption isn’t widespread. Costs and benefits—the

… Read the rest

InfoSWMM, SWMM5

Why Prolonged #Sitting And Standing Is Unproductive

November 25, 2014 / InfoSWMM, SWMM5

Why Prolonged Sitting And Standing Is Unproductive #infographic

via Blogger http://ift.tt/1vJTek4… Read the rest

InfoSWMM, SWMM5

@RDICKINSON for @Innovyze on @Medium or my Modeling Posts on Medium

November 22, 2014 / InfoSWMM, SWMM5

This is a 2014 blogging experiment - a new set of posts on Medium. I got the idea from @boonsri The blogs describe @Innovyze software and SWMM5

http://ift.tt/153zNaJ

Robert E Dickinson

via Blogger http://ift.tt/1Ay7jTf… Read the rest

ARC GIS, Force Mains, InfoSWMM, SWMM5

Showing Multiple Link Attributes in InfoSewer

November 22, 2014 / ARC GIS, Force Mains, InfoSWMM, SWMM5

This blog shows how to display multiple link parameters.

The 1st method would be to use Arc Map Layer properties and label multiple parameters for each gravity main or force main. The image below shows and example and here is the code inside of Arc Map to do this

Function

… Read the rest

#INFOSWMM, ARC GIS, History, InfoSWMM, SWMM5

InfoSWMM 2D Version 13 Brings Significant 1D and 2D Simulation Advancements To Power Users

November 18, 2014 / #INFOSWMM, ARC GIS, History, InfoSWMM, SWMM5

InfoSWMM 2D Version 13 Brings Significant 1D and 2D Simulation Advancements To Power Users

Latest Release Confirms Product as Leading GIS-centric Urban Drainage Modeling and Management Solution

Broomfield, Colorado, USA, November 18, 2014

Innovyze, a leading global innovator of business analytics software and technologies for smart wet infrastructure, today announced

… Read the rest

#INFOSWMM, ARC GIS, InfoSWMM, SWMM5

Arc Map Backwards Compatibility for InfoSWMM

November 17, 2014 / #INFOSWMM, ARC GIS, InfoSWMM, SWMM5

Arc Map Backwards Compatibility for InfoSWMM:

Use windows explorer to, make a zero byte mxd file with the same name as your isdb folder,
click on the blank mxd file and initialize InfoSWMM or InfoWater,
Use the Table of contents to zoom to an InfoSWMM layer,
fix the extents of

… Read the rest

Translate »