Storm/Sewer Modeler with a 45 yr association with EPASWMM. Now at Autodesk supporting InfoWorks ICM_SWMM Founder http://robertdickinson.org, Chair/TAC at http://CIMM.ORG
Storm/Sewer Modeler with a 45 yr association with EPASWMM. Now at Autodesk supporting InfoWorks ICM_SWMM
Importing Data from InfoSewer to InfoSWMM
The direct import of InfoSewer to InfoSWMM (Figure 1) is both direct and robust, but you must be aware of Run Manager changes to optimize the InfoSWMM model:
- Ensure that the Flow Units in InfoSWMM Run Manager match the default flow units in InfoSewer
How to Model H2S in ICM
Hydrogen Sulphide Input Data and Equations w/ Sample Model
Figure ICMT Contents
Figure ICM Network - BOD is loaded at LoadNode
How to simulate H2S in InfoWorks ICM – the attached ICMT file is called H2S_ICM for ICM 2021.1
1. Create flood damage extent
The InfoSWMM Risk Assessment Manager is laid out according to the duties required for risk assessment. Four options are found in the drop-down menu of the risk assessment. Each of these instructions launches a new dialog box where users can submit further information. The following … Read the rest
GIS Gateway - Create Shapefile
From the GIS Gateway, the Build Shapefile tool lets you create a new ESRI® Shapefile from InfoSWMM data. Every attribute can be loaded into the new Shapefile attribute table by using the data associated with each attribute type. The application of the tool can be … Read the rest
Junction Dry Weather Flow (DWF)
The Junction Dry Weather Flow (DWF) data table stores information regarding the dry weather load (e.g., sanitary loads) entering the collection system at the junction node. Refer to the section on the inflow editor for more information on these input data. The following table shows … Read the rest
Introduction to Example One
This project modified in this tutorial illustrates how Designer calculates sewer conduit size, storage volume, and pump size to meet specified design criteria at the minimum cost.
The model schematic is shown on the next page. The model contains two wastewater treatment plants (outfall110 and outfall94), … Read the rest
Question: How does SWMM5 solve the 1D St Venant Equation in its conceptual Link/Node Network?
Answer: See these graphs of the solved for variables in the solution.
1/ There is also an ArcEngine version of InfoSWMM call InfoSWMM SA. I will SA to show some hidden features of the 1D … Read the rest
Chapter 12 Exercises
The exercises in this chapter will give you practice in exploring some of the additional reporting features of InfoSWMM 2D.
Exercise 12A Initialize the InfoSWMM 2D Model
In this exercise, you will create a 2D Model in InfoSWMM.
1. Open the project located at C:\Training\InfoSWMM\Ch12\Ch12Start.mxd… Read the rest