Note: State InfoSewer solution solves for the link flow and node heads
Here is an example of how the Steady State InfoSewer solution solves for the link flow and node heads or depths:
• 1ST Flow is computed in each link and d and d/D is calculated based on … Read the rest
Subject: SWMM 5 Clocktime RTC Rules for Pumps, Weirs and Orifices
You can use the Control or RTC rules in SWMM 5 to adjust the settings of the weirs, pumps and orifices based on the clock time each day of your simulation. Here is an example that will … Read the rest
Subject: Reading the Output of Older SWMM 5 versions in Newer SWMM 5 Versions
It is very easy to read the output graphs and output text file from older versions of SWMM 5 in newer versions of SWMM 5 as long as the rules are followed:
1. You need to … Read the rest
Subject: How to see the effect of the Pump Setting in the RTC Rules of InfoSWMM and H20MAP SWMM
Step 1. Pump Startup and Shutoff Depth
Depths to turn the Pump On and turn the Pump Off. In this example, the pump will be off when the Wet Well Depth … Read the rest
------------------------------------------------------
EPA SWMM 5 Build 5.0.022 (04/21/11)
------------------------------------------------------
Engine Updates
1. The following fixes and updates were made to the LID module of the code (lid.c):
a. The Drain Delay time for a Rain Barrel LID is now correctly converted internally from hours to seconds.
b. … Read the rest