The following report types are available from the Output Report Manager. Choose a report for more information:
| Steady State Analysis | Steady State Design | EPS |
| Static Loading Manhole Report | Pipe Design Report | EPS Loading Manhole Report |
| Static Chamber Manhole Report | EPS Chamber Manhole Report | |
| Static Outlet Report |
Rain Barrel LID Control for InfoSWMM and InfoSWMM Sustain w/ SWMM5
This is an introduction along with images of the LID Control and data require3ments in InfoSWMM. Every InfoSWMM Control uses from one to 5 layers of data - each with different data requirements. You can use the Siting Manger … Read the rest
Utilizing LID controls within a project is a two phase process that:
1. creates a set of scale-independent LID controls that can be deployed throughout the study area,
2. assigns any desired mix and sizing of these controls to selected Subcatchments.
Bear … Read the rest
Run InfoSWMM Sustain for ICM SuDS and SWMM 5 LID’s
The Optimization takes place after either you create the LID Candidates using the Siting Manager, Createthe LID's yourself on the Map or import the LID's from InfoSWMM. The optimizer as shown in the following image Minimizes Cost and Maximizes the … Read the rest
LID Output Tabular Reports (Time Series Report) for InfoSWMM and InfoSWMM Sustain
The LID Report in Output Report Manager lists the LID pathway values for individual timesteps for each LID Control on every Subcatchment for these parameters:
1. Surface Inflow normalized to the area of the LID Control in units … Read the rest
LID Graphs n InfoSWMM and InfoSWMM Sustain w/ SWMM5 LID
The LID Graphs in Output Report Manager graphs the LID pathway values for individual timesteps for each LID Control on every Subcatchment for these parameters:
1. Surface Inflow normalized to the area of the LID Control in units of inches/hour … Read the rest
LID Placement for Controls in InfoSWMM and SWMM5 w/ InfoSWMM Sustain
There are two different approaches for placing LID controls within a Subcatchment:
LID Controls are low impact development practices designed to capture surface runoff and provide some combination of detention, infiltration, and evapotranspiration to it. They are considered as properties of a given Subcatchment, similar to how Aquifers and Snow Packs are treated. … Read the rest
In InfoWorks ICM 6.5 and later the SWMM 5 LID Controls were added to the Subcatchment Grid of ICM. Here is a copy of the ICM Help File. The LID Controls are entered in the Subcatchment Grid (1), in the SuDS or LID Tab (2), it … Read the rest
The LID Usage Editor is invoked when the LID Usage Icon of a Subcatchment is selected for editing. It is used to identify a group of previously defined LID controls that will be placed within the Subcatchment, the sizing of each control, … Read the rest
In the past few years, advances in infrastructure management technology have been occurring at an accelerated pace. This technology is now being realized within the context of sanitary and storm sewer modeling. It has allowed sewer collection system modeling applications to seamlessly integrate with GIS productivity … Read the rest
Rainfall Dependent Inflow and Infiltration from the EPA SWMM 5 Hydrology Manual
7.1 Introduction
Rainfall dependent (or rainfall-derived) inflow and infiltration (RDII) are stormwater flows that enter sanitary or combined sewers due to "inflow" from direct connections of downspouts, sump pumps, foundation drains, etc. as well as "infiltration" of subsurface … Read the rest
The relationship between the Various InfoSWMM H2OMap SWMM
Versions and SWMM5
The relationship between ICM
, ICM SE, InfoSWMM, InfoSewer
, H2OMap Sewer, and SWMM5. InfoSWMM can import H2OMap SWMM, SWMM5, H2OMap Sewer, InfoSewer can export … Read the rest
A.1 Units of Measurement
| Parameter | US Customary | SI Metric |
| Area (Subcatchment) | acres | hectares45 |
| Area (Storage Unit) | square feet | square meters |
| Area (Ponding) | square feet | square meters |
| Capillary Suction | inches | millimeters |
| Concentration | mg/L (milligrams/liter) ug/L (micrograms/liter) Count/L (counts/liter) | mg/L ug/L Count/L |
| Decay Constant (Infiltration) | 1/hours | 1/hours |
The Simulation Options dialog box is used to adjust some facet of a model prior to a model run. Simulation options are usually altered to be associated with a given scenario.
For example, suppose the user wishes to specify a peaking equation for one model run that differs … Read the rest
Arc Map Voronoi Maps for InfoSWMM 2D
There is a certain beauty in Arc Map Voronoi Maps.
This help file topic contrast the St Venant Solution for InfoSWMMH2OMap SWMM 
, InfoSewer/H2OMap Sewer
and ICM/ICM SE
.
The assumptions behind Lumped and Distributed Models along … Read the rest
ArcGIS backwards conversion for #INFOSWMM, #INFOSEWER and #INFOWATER
If you make the MXD a zero byte file it will strip away any Arc GIS specific information which allows you IWDB or ISDB folder to be used in any version of Arc GIS. You can do the following to make the … Read the rest
