#INFOSWMM
Launch Scenario Explorer by selecting Scenario Explorer from the InfoSWMM and InfoSWMM SA Scenario Menu or by clicking the Scenario Explorer button (
) on the InfoSWMM H2OMap SWMM InfoSWMM SA Control Center Toolbar Standard … Read the rest
The Storage Summary report table presents a summary of some storage result variables that could assist the modeler to easily analyze the drainage system. Using this report results alone, the user can easily identify storage(s) that have … Read the rest
The Colorado Urban Hydrograph Procedure for InfoSWMM and InfoSWMM SA
The Colorado Urban Hydrograph Procedure (CUHP) uses the equations and procedures presented in the Urban Drainage Criteria Manual (USDCM) of the Urban Drainage and Flood Control District (UDFCD). Shape of the CUHP synthetic unit hydrograph is determined using the following … Read the rest
The General page of the Simulation Options dialog, shown below, sets values for the following options. In InfoSWMM v14.5 and above each tab is shown in two rows
Contents of this simulation option dialog page are described … Read the rest
Shown below is a definition sketch of the two-zone groundwater model that is used in InfoSWMM H2OMap SWMM InfoSWMM SA . The upper zone is unsaturated at a varying moisture content of θ. The lower zone is … Read the rest
The Export Manager enables the modeler to export InfoSWMM H2OMap SWMM ‘s element data (both graphical details and attribute data).
Click on the following links for more information:
To Launch … Read the rest
The Junction Summary report table presents a summary of some junction result variables that could assist the modeler to easily analyze the drainage system. Using this report results alone, the user can easily identify junction (s) that … Read the rest
The Conduit Summary report table presents a summary of some conduit result variables that could assist the modeler to easily analyze the drainage system. Using these report results alone, the user can easily identify conduit(s) that have … Read the rest
InfoSewer versus InfoSWMM versus ICM
A short comparison of the features in InfoSWMM, ICM and InfoSewer. Many of the same rows apply to H2OMap SWMM, InfoSWMM SA and H2OMap Sewer.
| Feature Class | Feature | InfoSewer | InfoSWMM | ICM | |
| Base Functionality | Conservative Solution as an option |  |
|
 |
|
| Public Domain engine | |
|
|
||
| Calibrate model to flow | |||||
Like all other visual data objects, pump object is edited using the attribute browser.
To edit attributes of a pump;
from InfoSWMM H2OMap SWMM InfoSWMM SA Edit Network tool Water quality routing within conduit links assumes that the conduit behaves as a continuously stirred tank reactor (CSTR). Although a plug flow reactor assumption might be more realistic, the differences will be small if the travel time through … Read the rest
Output Statistics Manager for up to 500 Node, Link or Subcatchment Statistics in InfoSWMM and InfoSWMM SAThe statistics module separates model outputs ( e.g., runoff from a Subcatchment) in to events, performs statistical analyses, and reports basic statistical information including extreme values (i.e., minimum and maximum), the first three … Read the rest
The Simulation Task Manager is used to allow you to continue to work in the model while a simulation is running. The tool manages all of … Read the rest
Run Manager in InfoSWMM and InfoSWMM SA for 32 bit, 64 bit, Multi Core, Batch and Simulation Manger Model Runs using the current SWMM 5 EngineThe Run Manager, shown below, is used to perform InfoSWMM H2OMap SWMM InfoSWMM SA simulations and to manage simulation output sources (results). When you … Read the rest
Facility Manager in InfoSWMM and InfoSWMM SA helps you Control Active and Inactive ElementsThe Facility Manager is used to create and maintain the active facility set. The active facility set defines the network components in a current model that will be considered during the next simulation run(s). Facility sets … Read the rest
A Domain is a temporarily selected subset of network components. The Domain can be used for a variety of purposes including:
InfoSWMM H2OMap SWMM InfoSWMM SA offers an advanced RTC rule that could be used to effectively simulate the operation of pumps and flow regulating structures such as weirs, orifices, and outlets. Unlike Simple Controls, RTC rules allow for the … Read the rest
The following defaults are from the EPA Stormwater Calculator
https://www.epa.gov/water-research/national-stormwater-calculator
A few of these parameters such as the capture ratio are not parameters in InfoSWMM Sustain
There are some additional points to keep in mind when applying LID … Read the rest
The Junction inlet data table stores information regarding the inlet at the junction node. Refer to the section on inflow editor for more information on these input data. The following table shows the whole first row of the DB Table on separate rows in the image.
| Field | Description |
APPENDIX B – Visual Object Properties
B.1 Rain Gage Properties
| Name | User-assigned rain gage name. |
| X-Coordinate | Horizontal location of the rain gage on the Study Area Map. If left blank then the rain gage will not appear on the map. |
| Y-Coordinate | Vertical location of the rain gage on the Study |