InfoSWMM SA has an easy to use Interface which allows you to work more productively with a modern, workflow-centric, ribbon user interface. The new interface is designed to help you quickly find the commands that you need to complete and understand your network. InfoSWMM SA … Read the rest
Steps for Running RDII Analyst in H2OMap SWMM
Step 1. Create the RTK UH in the H2OMap SWMM Attribute Browser (AB)
Step 2. Assign the RTK UH to a node (you need one node at least to Run RDII Analyst).
Step 3. Open up RDII Analyst and Set up the … Read the rest
This is a one HTML file version of the SWMM 5 Tutorial for InfoSWMM SA (Standalone) for modeling the quantity and quality of stormwater runoff produced from urban areas. More images have been added to the EPA SWMM tutorial and this particular tutorial … Read the rest
EPASWMM5 Tutorial with Images for SWMM 5.1.014
This is a one HTML file version of the SWMM 5 Tutorial for modeling the quantity and quality of stormwater runoff produced from urban areas. You can find the original in the current EPA SWMM5 Help file. More images have been added. The … Read the rest
Modeling H2S in InfoSWMM
You can model Sulfide in InfoSWMM using the H2S water quality modeling option which uses BOD5 loading at nodes to estimate the S concentration in the nodes and links of the network using constant network parameters for:
Excerpt from the EPA manual Storm Water Management Model Reference Manual Volume III – Water Quality (PDF) which can be found here
The variety of LID controls modeled by SWMM introduces a significant number of design variables and parameters that must be … Read the rest
References for InfoSWMM and InfoSWMM SA
The facility set defines those network components (e.g., conduits, Subcatchments, pumps, junctions, etc.) that will be considered during the next InfoSWMM H2OMap SWMM InfoSWMM SAsimulation. The facility set may include the entire network model or a subset of network components. … Read the rest
Using Simulation Task Manager is simple and straightforward.
This example shows how to run a continuous simulation with InfoSWMM H2OMap SWMM InfoSWMM SA using a long-term rainfall record. It will analyze the performance of the drainage system and BMP detention pond for the 29 acre residential site designed in Example 3. The … Read the rest
If you are using Steady State flow and not EPS Flow you should do the following:
1. Define your Base Flow in either Load1 or Load2 for the loading manhole,
2. Select Peakable Base Flow as the Load Type
3. Define your Alternate Peaking Curve under the Tab Peaking in … Read the rest
SWMM 5 Loss Term Values for various velocities and K values
SWMM 5 has three loss terms available for each link: Entrance, Exit and Other losses. The Entrance loss uses the upstream link velocity, the Other loss uses the center link velocity and the Exit loss uses the downstream link … Read the rest
We have two HTML output files that you need to look at to see the overall 1D to 2D back to 1D Mass Balance. Note: The bullet points match the red bullet numbers in the image.
1. In the 1D Report the Internal Outflow is the Net Amount of Water … Read the rest
What are the Options for LID Inflow and Outflow in SWMM 5?
The Runoff Surfaces in SWMM 5 are:
1. Pervious area with either Green Ampt, Horton or CN Infiltration
2. Impervious area without Depression Storage or Initial Losses
3. Impervious area with Depression Storage or Initial Losses
Outflow Options … Read the rest
Continuous simulation using SWMM 5 LID and groundwater features in a linked 1D/2D
network using InfoSWMM 2D for a 50 year period
Robert Dickinson, Chun-Hou Orr, Feng Shang
Innovyze Inc., USA
Oliver C. Boody et al., Environmental Science & Engineering, Inc. May 1985.
Oliver C. Boody et al., Environmental Science & Engineering, Inc. May 1985.
Anthony Kuch, Robert Dickinson, Alan Akman and Jayant Keskar CAiCE Software Corporation
February 18, 1999
1999 Stormwater and Water Systems Modeling
Mississauga, ON
A small note on my background with Visual Hydro, Visual SWMM and CAiCE Software
1998-2000, Lead Software … Read the rest
A collection of various versions of SWMM 3 and 4. WCH_2004 is the last version developed by Wayne Huber at OSU in 2004 before the 1st SWMM5 release
and code for SWMM4.99 by CDM Pittsburgh (as of 2004)
This is the data input file for a CDM/CDMSmith Pittsburgh versionSWMM4 model from 2000 to 2004. It has additional capabilities beyond SWMM 4.4 and was made as a bridge between SWMM 4 and SWMM 5, thus the 4.5 number.
* <<<<<<<<< SWMM 4.45A(beta) RUNOFF DATA FILE >>>>>>>>>
*
*… Read the rest
This is the data input file for a CDM/CDMSmith Pittsburgh versionSWMM4 model from 2000 to 2004. It has additional capabilities beyond SWMM 4.4 and was made as a bridge between SWMM 4 and SWMM 5, thus the 4.99 number.
* <<<<<<<< SWMM 4.99 EXTRAN DATA FILE >>>>>>>>>
*
*
* … Read the rest